Buy the CentrifanTM Recirculating Evaporator at a Limited Time Summer Promotional Price!
- No vacuum pump required to dry fractions 3 - 5 times faster than benchtop vacuum centrifuges or blow down concentrators.*
- Save energy, laboratory space, and maintenance headaches by eliminating the need for vacuum pumps
- Eliminate oil mess, heat, noise and vacuum tubing
- Set temperature up to 60°C
- Programmable heater shut-off time
- Use storage/media bottles, microtiter plates, or scintillation vials
*all evaporation rates were obtained while connected to
a -50 degree C cold trap (cold trap is available separately).
Limited Time Summer Promotional Price!
The Centrifan RE is a standalone bench top evaporation device that utilizes the gas flow created by the spinning rotor along with heat to provide an incredibly rapid and safe evaporation environment without the need for a vacuum pump. Because the Centrifan RE operates at atmospheric conditions, a heater placed in the recirculating gas-flow is all that is needed to provide precision temperature-driven acceleration of the evaporation process. Compared to traditional bench top concentrators that use either a water bath or infrared lamps, Centrifan RE provides a far superior sample-friendly drying environment.
Operates at Atmospheric Pressure
The Centrifan RE operates at atmospheric pressure and replaces typical vacuum centrifuges or blow down concentrators. Using only heating fins within the rotor compartment and the spinning rotor, the Centrifan RE provides a simple and effective evaporation environment.
Accommodates Standard Collection Vessels
- 4 or 8 (250 mL) media bottles
- 24 (20 x 150 mm) test tubes
- 24 (13 x 100 mm) test tubes
- 4 (96 well) microtiter plates
- 24 (20 mL or 40 mL scintillation vials)
Custom rotor configurations are available.
Space Saving Design
The compact Centrifan RE can be located anywhere on the lab bench rather than taking up space in a fume hood. Vapors are directed through an exhaust hose that can be connected to the laboratory vent system or directed to a cold trap for condensation.
Specifications
- Solvents:
Aqueous, organic, buffered
- Dimensions: (inches) 20W x 9H x 26D
- Rotor Speed: Low (800 to 1500 RPM)
- Temperature Range: Ambient to 60ºC
click images to enlarge
(please turn pop-up blocker off) |
 |
| The 160 cfm gas flow created by the rotor is redirected through passages to the surface of the liquid inside the evaporation vessel.
This aggressive blow drying continuously sheers off the top layer of
the liquid while the centrifugal force holds the non-volatile compounds securely in place. Tests with talcum powder demonstrated a 0% loss of sample during the evaporation process. |
|
|
[ Download Data Sheet ] |
| |
Just $8,550* if purchased before
July 31, 2009
Call 508-520-4000 or email infor@modularsfc.com
*$12,250 with standard (-50oC) cold trap;
$14,250 with ultra (-85oC) cold trap. |
|
How to Order
P/N: 20250 Centrifan RE
Description: Recirculating Evaporator (8 position rotor for 250 mL storage/media bottles)
- P/N: 20220 Cold Trap, Standard Temp. (-50oC)
- P/N: 20320 Cold Trap, Ultra-Low Temp. (-85oC)
Please indicate promotion code HSM-CRE on your purchase order and submit by July 31, 2009 to obtain our special summer promotional price.
FAX purchase orders to (508) 520-4094, email infor@modularsfc.com or mail to:
Modular SFC
842 Upper Union Street
Franklin, MA 02038
Attn: Centrifan RE summer promo |
| |
|
| |
 |
| |
 |
|
